The smallest in our gang. But don’t underestimate it! The M8 is an uncompromising multifunctional speaker for small venues, or combined with B15 or even with B30, also flexible enough for larger venues like the next techno party.
The passive combination of M8 and B15p to an amplifier is really good fun and is at the same time very compact and plays like a high-end HiFi combination, just a bit louder of course…
It is therefore recommended for a whole range of uses: from small, unobtrusive speech reinforcement to use as a stage monitor to a live and party box.
Of course the high frequency driver combination of the M8 (rotatable by 90 degrees) using BEM (boundary elements method) is also developed and then optimised with painstaking detailed work.
Meaning that the little one emits up to over 15 kHz with constant directivity and low distortion factor.
By the way: the M8 is also available in left and right enclosures and can be combined with any other TW AUDiO speakers.
| Drivers | 1 x 8â?? LF / 1 x 1â?? HF | ||||
| Frequency range | 70 - 20000 Hz | ||||
| Power capacity programm / peak: |
|
||||
| Impedance |
|
||||
| Coverage range (h x v) | 90° x 60° HF-horn, rotable | ||||
| Sensitivity 1 W / 1m |
|
||||
| SPLmax / 1m / peak | 124 dB | ||||
| Connectors | 4 Speakon NL4 | ||||
| Dimensions (h x w x d) | 440 x 240 x 240 mm | ||||
| Weight | 10,5 kg | ||||
| Finish | Warnex structure paint | ||||
| Accessoires | SBM8, WHM8, BagM8, CaseM8 | ||||
| Options | left and right enclosures, RAL colours |
 Product catalogue 2010 english (PDF)
|
|
 TWAUDiO_M8_EASE_DATA (ZIP)
|
|
|
M8_Dimensions.pdf (PDF)
|
|
|
M8_DXF.zip (ZIP)
|
|
 |
BagM8 Carrying bag for two M8 Carrying bag for two M8, professional version made of black polyester with inner foam, additional bag for accessories, carrying straps |
 |
CaseM8 Flightcase for four M8 Flightcase for four M8, professional version made of black PVC laminated 9 mm birch plywood, four 100 mm swivel castors, thereof two with brakes, six recessed sprung handles, dimensions 600 x 710 x 640 mm, weight 34.5 kg |
 |
DHRT Doughty Halfcoupler Slimline Doughty halfcoupler slimline with M12 ring nut, maxi- mum load 240 kg, for single point installation at circular tubes with diameter 45 - 48 mm |
 |
DHST Doughty Halfcoupler Slimline Doughty halfcoupler slimline with M12 screw and stop Nut, maximum load 240 kg, for single point installation at circular tubes with diameter 45 - 48 mm |
 |
DSF Aircargo Doublestudfitting Aircargo doublestud fitting for for M12 / M15 /T24 / S30 loudspeakers, latchable in flying track |
 |
HSF MOUNTING ADAPTER Flange to mount swivel brackets on standard speaker stand or distance pole (36 mm pipe), incl. two M10 screws and nuts |
 |
KSVO6-035 chain fastener chain fastener hardened, tempered and galvanized, CE certified, 0.35 t WLL, enables direct connection of two DSF or connection of DSF with DHRT |
 |
RSM10 Eyebolt M10 Eyebolt M10, DIN 580, galvanized, WLL 0.23 t |
 |
SBM8 Swivel braket with adaptor plate M8 Swivel braket with adaptor plate for rotatable upright or crosswide installation of M8 loudspeaker with HSF on stand / distance pole or with DHST directly on truss / pipe, weight 1.5 kg |
 |
SS06-100 Safety, steel, diameter 6mm Safety steel, diameter 6 mm, length 1 m, for saving loads up to 60 kg based on VBG requirements incl. two shackles with WLL 0.5 t |
 |
SS08-100 Safety, steel, diameter 8mm Safety steel, diameter 8 mm, length 1 m, for saving loads up to 120 kg based on VBG requirements incl. two shackles with WLL 1 t |
 |
WHM8 Wall holder for installation of M8 Wall holder for installation of M8 loudspeaker, mounting with two M6 threads at the enclosure, weight 0.9 kg |
Go to Top